What heater should i get for my betta

Instead, many inexpensive heaters simply heat the water to a preset temperature and then stop. Being able to read the temperature scale makes it easier to set your heater to the right level, as well as to tell when the water has reached the proper temperature.

It may not be accurate, or the water directly around the heater may be somewhat warmer than water on the far end of the tank. Another thing to consider when choosing a betta tank heater is how easy it is to use, especially when fully submerged.

In addition, your betta heater should be easy to set up in your tank, with suction cups or a simple hanging mechanism to get it below the water level. Along the same lines, you should look for a heater that has an automatic safety shut-off to turn the heater off if the water level drops below the heater. Your tank heater should also be designed to last. Finally, look for heaters with a safety guard or protective casing to prevent your betta fish from coming into direct contact with the heating elements, which can be dangerously hot for your fish.

This tank heater from Fluval is designed to make heating your aquarium simple and effortless. The heater has a small LCD screen that displays the current water temperature in your aquarium. In addition, the screen changes color from blue to green to red depending on whether the water temperature is below, at, or above the temperature that you set. The heater is adjustable between 68 and 93 degrees, which gives you plenty of leeway in adjusting the temperature for warmer and colder days.

In addition, the temperature can be set in 0. The included mounting bracket can go nearly anywhere in your tank, and you can remove the heater from the tank without having to take out the mounting bracket. Even better, the heater can go on the mounting bracket in any direction so you can easily read the temperature screen. The heater is fully protected so that your betta cannot come in contact with the heating elements, as well as shockproof to prevent damage in the case of drops or larger fish hitting it.

While the watt heater is rated for tanks up to gallons, Fluval makes multiple versions of this heater down to 50 watts suitable for aquariums up to 15 gallons. Most notable, this heater is capable of colder temperatures down to 65 degrees, which is ideal if you live in a hotter area where the goal of the heater is primarily to keep the water temperature consistent. Keep in mind that this heater is significantly longer, at 20 inches, so your tank will need to be shaped so that the heater can remain fully submerged.

EHEIM also makes smaller versions of this tank heater down to 25 watts, which is suitable for small 5-gallon tanks. It was exclusively made out of glass. Or go for an automatic heater that you would hang on the back of the aquarium. Now, the assortment of available heaters for your tank can fill entire aisles of the pet stores. You can select from ranges of size and shape, temperature outputs, build-materials, wattages, control systems, and more.

You need at least 25 watts of power for every 10 degrees of existing ambient temperature per 10 gallons you need to heat. However, you could also get a watt tank heater with variable temperature controls.

That way, you could set that heater to the low side and have room to increase if necessary. For many people, a fairly large concern is that their lack of knowledge and fear of hurting their fish. Remembering that rule of thumb above about tank heater wattages and aquarium capacities will help ensure that you end up with healthy and happy betta fish.

Keep in mind that sales representatives may encourage you to get a higher wattage for the sake of making a higher sale. Always make sure to educate yourself before going into the pet store. This is a pre-set heater made of quartz glass, making it break-resistant.

The temperature setting is visible, and the device is fully submersible. The minimum watt option might be a bit much for novice hobbyists with smaller tanks. But the construction and design is a good example of what you should be looking for with this type of heater, even if you need to downsize. The Elite Thermostatic is a hang-on-the-back heater. Take care to submerge the heating element first, let it sit, then slowly heat it up. However, they are cheaper, and this is no exception.

This preset heater stays on at 78 degrees. Essentially, this is a good, cheap placeholder until you can invest in something a little more substantial with a longer warranty this one is just 1-year. This is a digital heater, equipped with a dual temperature display. The temperature sensor is separate from the main device, making it more accurate and allowing for a more stable heat maintenance process.

It is fully submersible, meaning you can tuck it away in various parts of the tank without a hitch. Additionally, this heater has memory storage, which is great if you frequently experience power outages. Preset aquarium heaters also called Thermostatic heaters are a type of aquarium heater that has an analog thermostat built into the device.

Nearly every thermostatic heater you can find is fully submersible. These submersible heaters all come with a line of some sort that indicates the minimum submersion depth needed to function without fail.

In general, this is about an inch to an inch and a half from the top of the heater. In most cases, you will not have to or want to fully submerge your preset aquarium heater. As was mentioned earlier, you really want to give these heaters a good 30 minutes of pre-soak time in the fish tank before you even plug them in. This will give the aquarium heating unit some time to acclimate its internal components to the existing temperature of the aquarium.

When you do go to plug-in and turn on the preset heater, you should really have a secondary thermometer on hand. Use this to verify the temperature. Also, note that it will likely grow larger over time as you near the time to replace the heater. The design allows for the heater to be fully submersible. Also, you can either install it vertically or horizontally. Thanks to its small footprint, it will not take up much space in your aquarium. Some even install it behind plant decors.

If you are looking for a heater for larger tanks, this is what you need. It is designed to work great for aquariums up to 10 gallons. It is amazing how it is able to reach the preset temperature in a short time. The model does work great when it comes to reaching and maintaining a specific temperature.

You no longer have to make manual adjustments. Just set it up and turn it on. You might have to get a separate thermometer to measure the water temperature. The durable PPC plastic for its housing promises the best durability. It should be able to remain working great for years to come. Also, the design and use of such material keep it more resilient than glass sleeve heaters.

There is also a red light indicator that helps you know that the heater is working. As for the installation, you can use the included suction cup for a quick set up process. You do not have to spend a lot of money on betta tank heaters when this one is available.

Thanks to its compact nature, it should work for even the small tanks. Users also love that it can be easily set up within no time. It is a multipurpose heater because it can work for both fresh and saltwater aquariums. You do not need to buy separate heaters from today. To make it even better, you will find it made of a durable polymer. This enhances the durability of the heater even further.

With its 2-year warranty, it is better than what you get with the other models. Also, you should be able to like its reliable performance. The best part is that it can maintain the water temperature of 78 degrees Fahrenheit all the time. No more worries that it will overheat. The first step is getting yourself the best heater in the first place.

The best part is that we have reviewed some of the top models above. Well, it should be easy to get one for yourself now.

It is recommended to get one that is a submersible water heater. The submersible heater is known for being easy to install and also heats more water gallons faster.

Read the description to make sure that it is a submersible heater. You have to inspect the heater before you can install it. Sometimes it can crack or break during transportation.

We all know that water and electricity will not work great. Normally, the lower cost tanks are likely to have a preset temperature. This can be inconvenient if you want to adjust the tank temperature to account for changes in the weather. Here, you need to consider how easy it is to understand the temperature scale and the overall functioning of the tank heater. Being able to read the temperature scale of your tank is necessary if you want to make adjustments.

If you want to keep your tank at a specific temperature, you need to be able to read the scale easily. It is important to note that the temperature scale of the tank may not be a hundred percent accurate.

For greater accuracy, you can get a thermometer for your tank to double-check the temperature of the water. Keep in mind that the tank heater will be completely submerged in the water so the design should be such that you can use it easily even then.

Heaters with large knobs are ideal. Most heaters will have either suction cups to attach them to the tank wall or a hanging mechanism to submerge them in the water. Make sure that you read the fine print to ensure that the heater is safe enough to be completely submerged in the water. The heater should have a fail-safe mechanism which makes it turn off if the water level is below the heater. The better the quality of the tank heater, the more resistant it will be to damage.

Choose wisely so that your heater is strong enough to withstand a few falls or electric currents.